ACQ196CPCI 96 channel 500 kSPS Simultaneous Digitizer

Analog Input Subsystem
Number Of Channels	96/64/32
Sample Rate	250, 500 kSPS/channel
Resolution	16 bits
Coupling	DC, Differential Input
Sampling	Simultaneous
Input Impedance	20kΩ default 10kΩ, 100kΩ (factory options)
Voltage Range	±10V default ±5V, ±2.5V (factory options)
Common Mode Range	±13V
Input Voltage Withstand	±100V
Offset Error	DAC Offset trim to 0.01% FS [2]
Gain Error	Numerical adjust to 0.01% FS [3]
INL	±3 LSB
DNL	±1 LSB
CMRR	>60dB FS @ 1 kHz
THD	>-85 dB
SINAD	-84 dB [1]
SFDR	100 dBc [1]
SNR	86 dB [1]
Full Power BW	250 kHz
Small Signal BW	2 MHz
Crosstalk (3 dB)	<90 dB @ 1 kHz FS Input
Temperature Stability	<25 ppm/C
Analog Output (RTM-AO16)
Number of Channels	16
Conversion Time	1usec
Resolution	16 bit
Output Range	±10V
Output Drive Current	20mA per channel maximum 10mA per channel averaged over 16 channels
Reconstruction Filter	1pole
AWG Max Rate	500kSPS/channel
Digital I/O
Number	6
Switching Characteristics	TTL
Maximum Clock Rate	1 MHz
Minimum High Time for Trigger	100 nS
Minimum Low Time for Trigger	100 nS

^[1] : Typical values measured at full scale with a 9.76kHz input.
^[2] : via hardware offset DAC set by calibration table
^[3] : via post processing numerical adjust using onboard calibration table

ACQ196 Platform Features

Item	Description
Form Factor	Compact PCI, 6U. Fully Compliant PICMG 2.0R3. PCI System and peripheral Slot capable Bus Isolation mode for standalone networked operation
Max Onboard Memory	1 gigabyte
Backplane Bus Interface	PCI 64 bit, 66MHz
Network Interface	1 Channels 100 base T ethernet, copper
Synchronisation	6 software routed DIO lines, can be switched to PXI signaling lines
FPGA	Xilinx SPARTAN, DSP capable.

ACQ196 Rear Transition Module Features

Item	RTM1
Ethernet	100 Base T1 x RJ45 (copper)
Console	9 Way D-Type (38kbaud default)
Isolated DI	4 lines isolated input
Registered DIO	32 Bits, programmable direction, 24mA drive